Kemesta ry:n toimialueiden julkaistut EN ja ISO standardit 2016
Jouni Valtanen (jouni.valtanenkemesta.fi), 9.1.2017
Kemesta ry:n tekniset komiteat julkaisseet 231 eurooppalaista (EN) ja kansainvälistä (ISO) standardia vuonna 2016
BiomimetiikkaISO/TC 266 Biomimetics
- ISO 18457:2016 Biomimetics - Biomimetic materials, structures and components
CEN/TC 411 Bio-based products
- EN 16751:2016 Bio-based products - Sustainability criteria
- EN 16848:2016 Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet
- CEN/TR 16957:2016 Bio-based products - Guidelines for Life Cycle Inventory (LCI) for the End-of-life phase
CEN/TC 386 Photocatalysis
- CEN/TS 16980-1:2016 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
- CEN/TS 16981:2016 Photocatalysis - Glossary of terms
CEN/TC 207 Furniture
- EN 527-2:2016 Office furniture - Work tables - Part 2: Safety, strength and durability requirements
- EN 581-2:2015/AC:2016 Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating
- EN 1729-1:2015/AC:2016 Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions
- EN 12727:2016 Furniture - Ranked seating - Test methods and requirements for strength and durability
- EN 14749:2016 Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods
- EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables
- CEN/TS 16611:2016 Furniture - Assessment of the surface resistance to microscratching
CEN/TC 335 ja ISO/TC 238 Solid biofuels
- EN ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016)
- EN ISO 16994:2016 Solid biofuels - Determination of total content of sulfur and chlorine (ISO 16994:2016)
- EN ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
- EN ISO 17827-2:2016 Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016)
- EN ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016)
- EN ISO 18846:2016 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
- EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016)
- ISO/TS 17225-8 Solid biofuels - Fuel specifications and classes - Part 8: Graded thermally treated and densified biomass fuels
CEN/TC 392 ja ISO/TC 217 Cosmetics
- CEN ISO/TR 19838:2016 Microbiology - Cosmetics - Guidelines for the application of ISO standards on Cosmetic Microbiology (ISO/TR 19838:2016)
- ISO 16128-1:2016 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products - Part 1: Definitions for ingredients
CEN/TC 23 Transportable gas cylinders ja ISO/TC 58 Gas cylinders
- EN 16753:2016 Gas cylinders - Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases
- EN ISO 14456:2016 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015)
- EN ISO 16148:2016 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection (ISO 16148:2016)
- EN ISO 12209:2013/A1:2016 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar (ISO 12209:2013/Amd 1:2016)
- EN ISO 24431:2016 Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016)
- ISO 11119-4:2016 Gas cylinders - Refillable composite gas cylinders - Design, construction and testing - Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
CEN/TC 218 Rubber and plastics hoses and hose assemblies ja ISO/TC 45 Rubber and rubber products
- •EN 1765:2016 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
- EN 14420-8:2013+A1:2016 Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
- EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
- EN 16643:2016 Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification
- EN ISO 1401:2016 Rubber hoses for agricultural spraying (ISO 1401:2016)
- EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016)
- EN ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016)
- EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
- EN ISO 7233:2016 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016)
- EN ISO 7326:2016 Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016)
- EN ISO 7751:2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:2016)
- EN ISO 8331:2016 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016)
- EN ISO 18752:2016 Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014)
- ISO 249:2016 Rubber, raw natural - Determination of dirt content
- ISO 289-2:2016 Rubber, unvulcanized - Determinations using a shearing-disc viscometer -- Part 2: Determination of pre-vulcanization characteristics
- ISO 813:2016 Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 degree peel method
- ISO 1304:2016 Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number
- ISO 1420:2016 Rubber- or plastics-coated fabrics - Determination of resistance to penetration by water
- ISO 1421:2016 Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
- ISO 1434:2016 Natural rubber in bales - Amount of bale coating - Determination
- ISO 1827:2016 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods
- ISO 2286-1:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass
- ISO 2286-2:2016 Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
- ISO 2286-3:2016 Part 3: Method for determination of thickness
- ISO 2782-1:2016 Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1: Differential-pressure methods
- ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
- ISO 4665:2016 Rubber, vulcanized or thermoplastic - Resistance to weathering
- ISO 4666-3:2016 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 3: Compression flexometer (constant-strain type)
- ISO 4674-1:2016 Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods
- ISO 5470-1:2016 Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
- ISO 6235:2016 Rubber, raw - Determination of block polystyrene content - Ozonolysis method
- ISO 6502:2016 Rubber - Guide to the use of curemeters
- ISO 6802:2016 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
- ISO 6804:2016 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification
- ISO 8033:2016 Rubber and plastics hoses - Determination of adhesion between components
- ISO 9924-1:2016 Rubber and rubber products-Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
- ISO 9924-2:2016 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers
- ISO 11235:2016 Rubber compounding ingredients - Sulfenamide accelerators - Test methods
- ISO 11344:2016 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
- ISO 13363:2016 Rubber and plastics hoses for marine-engine wet-exhaust systems - Specification
- ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications
- ISO 14558:2016 Rubber - Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
- ISO 18898:2016 Rubber - Calibration and verification of hardness testers
- ISO 19013-2:2016 Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification - Part 2: Gasoline fuels
- ISO 19246:2016 Rubber compounding ingredients - Silica - Oil absorption of precipitated silica
- ISO 21561-2:2016 Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Part 2: FTIR with ATR method
- ISO 23233:2016 Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc
- ISO 23337:2016 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine
- ISO 23529:2016 Rubber - General procedures for preparing and conditioning test pieces for physical test methods
- ISO 10571:2016 Tyres for mobile cranes and similar specialized machines
- ISO 17464:2016 Pneumatic tubes for automotive vehicles - Technical requirements and test methods
- ISO 18106:2016 Passenger car, commercial vehicle, truck and bus tyres - Methods for measuring snow grip performance - Loaded new tyres
CEN/TC 260 Fertilizers and liming materials ja ISO/TC 134 Fertilizers and soil conditioners
- EN 1482-3:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps
- EN 12945:2014+A1:2016 Liming materials - Determination of neutralizing value - Titrimetric methods
- EN 14984:2016 Liming materials - Determination of product effect on soil pH - Soil incubation method
- EN 16318:2013+A1:2016 Fertilizers and liming materials - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection
- (method B)
- EN 16847:2016 Fertilizers - Determination of complexing agents in fertilizers - Identification of heptagluconic acid by chromatography
- ISO 14820-1:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 1:Sampling
- ISO 14820-2:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
- ISO 15604:2016 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
- ISO 15959:2016 Fertilizers - Determination of extracted phosphorus
- ISO 18642:2016 Fertilizer grade urea -- General requirements
- ISO 18643:2016 Determination of Biuret Content for Fertilizers - HPLC Method
- ISO 18644:2016 Controlled release fertilizer - General requirement
- ISO 18645:2016 Water soluble fertilizer - General requirements
- ISO 25475:2016 Fertilizers - Determination of ammoniacal nitrogen
- ISO 25705:2016 Fertilizers-Determination of urea condensates using HPLC-Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B)
CEN/TC 193 Adhesives
- EN 204:2016 Classification of thermoplastic wood adhesives for non-structural applications
- EN 205:2016 Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints
- EN 12703:2016 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- EN 12704:2016 Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives
- EN 12765:2016 Classification of thermosetting wood adhesives for non-structural applications
- EN 14713:2016 Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding
- EN 14814:2016 Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
- EN 16254:2013+A1:2016 Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements
CEN/TC 139 ja ISO/TC 35 Paints and varnishes
- CEN/TS 16969:2016 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance
- EN ISO 1514:2016 Paints and varnishes - Standard panels for testing (ISO 1514:2016)
- EN ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
- EN ISO 3248:2016 Paints and varnishes - Determination of the effect of heat (ISO 3248:2016)
- EN ISO 4623-2:2016 Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016)
- EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
- EN ISO 4628-1:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016)
- EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
- EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
- EN ISO 4628-4:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
- EN ISO 4628-5:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
- EN ISO 4628-7:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016)
- EN ISO 4628-10:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016)
- EN ISO 4629-1:2016 Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst (ISO 4629-1:2016)
- EN ISO 4629-2:2016 Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016)
- EN ISO 7784-1:2016 Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016)
- EN ISO 7784-2:2016 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016)
- EN ISO 7784-3:2016 Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2016)
- EN ISO 11664-5:2016 Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram (ISO/CIE 11664-5:2016)
- EN ISO 11664-6:2016 Colorimetry - Part 6: CIEDE2000 Colour-difference formula (ISO/CIE 11664-6:2014)
- EN ISO 16482-1:2016 Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method (ISO 16482-1:2013)
- EN ISO 16482-2:2016 Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method (ISO 16482-2:2013)
- EN ISO 16773-1:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions (ISO 16773-1:2016)
- EN ISO 16773-2:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016)
- EN ISO 16773-3:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 3: Processing and analysis of data from dummy cells (ISO 16773-3:2016)
- ISO 15741:2016 Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
- ISO 19399:2016 Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method)
CEN/TC 249 ja ISO/TC 61 Plastics
- EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
- EN 438-1:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
- EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
- EN 438-3:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
- EN 438-4:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
- EN 438-5:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- EN 438-6:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater
- EN 12608-1:2016 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
- EN 15701:2016 Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
- EN ISO 1043-1:2011/A1:2016 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics - Amendment 1: New symbol ST for syndiotactic (ISO 1043-1:2011/Amd 1:2016)
- EN ISO 1043-3:2016 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
- EN ISO 1043-4:1999/A1:2016 Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998/Amd 1:2016)
- EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
- EN ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
- EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
- EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
- EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
- EN ISO 15512:2016 Plastics - Determination of water content (ISO 15512:2016)
- EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
- EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
- ISO 177:2016 Plastics - Determination of migration of plasticizers
- ISO 14853:2016 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system -- Method by measurement of biogas production
- ISO 16640-4:2016 Plastics- Biobased content - Part 4: Determination of biobased mass content
- ISO 18188:2016 Specification of polypropylene drinking straws
- ISO 18830:2016 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer
- ISO/TR 18486:2016 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
- ISO/TS 19022:2016 Plastics - Method of controlled acceleration of laboratory weathering by increased irradiance
- ISO 19679:2016 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide
- ISO 30012:2016 Carbon-fibre-reinforced plastics - Determination of the size and aspect ratio of crushed objects
CEN/TC 172 Pulp, paper and board ja ISO/TC 6 Paper, board and pulps
- EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)
- EN ISO 12625-4:2016 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption (ISO 12625-4:2016)
- EN ISO 12625-5:2016 Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016)
- EN ISO 12625-6:2016 Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016)
- ISO 2470-1:2016 Paper, board and pulps - Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness)
- ISO 4046-1:2016 Paper, board, pulps and related terms - Vocabulary - Part 1: Alphabetical index
- ISO 4046-2:2016 Paper, board, pulps and related terms - Vocabulary - Part 2: Pulping terminology
- ISO 4046-3:2016 Paper, board, pulps and related terms - Vocabulary - Part 3: Paper-making terminology
- ISO 4046-4:2016 Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products
- ISO 4046-5:2016 Paper, board, pulps and related terms - Vocabulary - Part 5: Properties of pulp, paper and board
- ISO 8254-3:2016 Paper and board - Measurement of specular gloss - Part 3: 20 degree gloss with a converging beam, TAPPI method
- ISO 9197:2016 Paper, board and pulps - Determination of water-soluble chlorides
- ISO 11093-4:2016 Paper and board - Testing of cores - Part 4: Measurement of dimensions
- ISO 11093-5:2016 Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation
- ISO 11476:2010 Paper and board - Determination of CIE whiteness, C/2 degrees (indoor illumination conditions)
- ISO 16260:2016 Paper and board - Determination of internal bond strength
- ISO 18522:2016 Paper and board - Automated off-line testing of physical properties for CD (cross direction) profiles
CEN/TC 137 Assessment of workplace exposure to chemical and biological agents
- EN 15051-2:2013+A1:2016 Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method
Takaisin